Yamaha fzs 1000 fazer 2001-2005 BMC pod filter kit with Velocity Stacks

Yamaha fzs 1000 fazer 2001-2005 BMC pod filter kit with Velocity Stacks

Pod filter kit
£299.99
Skip to product information
Yamaha fzs 1000 fazer 2001-2005 BMC pod filter kit with Velocity Stacks

Yamaha fzs 1000 fazer 2001-2005 BMC pod filter kit with Velocity Stacks

£299.99
Title

Off road/track use only: Ivan’s Full-Monty jet kit option.

Yamaha fzs 1000 fazer 2001-2005 pod filters kit.

Each kit contains the following:

2 x brand new BMC pod filters (opened to fit the velocity stacks to save you the struggle...)

4 x Velocity Stacks (already fitted to the pods)

4 x brand new original Mikuni main jets.

1m of high quality crank case breather pipe. 

2 x Stainless Steel jubilee clips

1 x black crankcase breather 

1 x Stainless Steel joint (connects crankcase breather and crankcase breather pipe)

1 x silicone cap for the AIS

1 x allen key to fit the velocity stacks to the carburettors 

This kit is only to be used with the Ivans Performance Full-Monty kit and use of any other kit is at your own risk.

For off road use only...

Carburettors and Full-Monty kit not included.

This kit is NOT the kit sold by Ivan and has been sourced and created by myself.

https://youtube.com/shorts/Ru5cUMLFCoo?si=kF0cL4i_DjzqGBFk

YOU DO NOT NEED TO REMOVE THE ENGINE OR CUT THE AIRBOX UP TO FIT THE PODS. THE BOX SPLITS INTO 2 PARTS AND REMOVING THE INLET RUBBERS GIVES ENOUGH CLEARANCE TO REMOVE THE ORIGINAL AIRBOX!

IMPORTANT LEGAL & EMISSIONS DISCLAIMER

This disclaimer applies to the Ivan’s Full-Monty jet kit supplied with the “Pod filter kit with Ivans Full-Monty jet kit” option.

Product Use: This carburettor modification kit is imported into the UK by Richard Mark LTD is sold strictly for off-road, track, or closed-circuit racing use only. It is not intended, certified, or approved for use on public highways in Great Britain or Northern Ireland.

Compliance & MOT: Installation of this kit alters the fueling characteristics of the vehicle. It is the sole responsibility of the purchaser to ensure that their vehicle complies with all local road traffic laws, construction and use regulations, and MOT emissions standards. Richard Mark LTD accepts no liability for any legal penalties, fines, or MOT failures resulting from the use of this product on public roads.

Liability: Motor vehicle modification carries inherent risks. This kit must be installed by a qualified motorcycle technician Richard Mark LTD is not liable for any mechanical damage, engine failure, or personal injury resulting from incorrect installation or misuse of this product


You may also like